OA-EDGE T Series


OA-EDGE T M 340BL / OA-EDGE T M 340S / OA-EDGE T S 340BL / OA-EDGE T S 340S / OA-EDGE T M 700BL / OA-EDGE T M 700S / OA-EDGE T S 700BL / OA-EDGE T S 700S / OA-EDGE T MS 700BL / OA-EDGE T MS 700S / OA-EDGE T M 900BL / OA-EDGE T M 900S / OA-EDGE T S 900BL / OA-EDGE T S 900S / OA-EDGE T MS 900BL / OA-EDGE T MS 900S / OA-EDGE T MS 1200BL / OA-EDGE T MS 1200S

The OPTEX OA-EDGE T has been developed to increase the safety of automatic swing doors. The OA-EDGE T is based on OPTEX Active Infrared triangulation technology. Due to its modular design, you can upgrade the safety level of the sensor by adding additional modules. The OA-EDGE T complies with the latest European regulation EN 16005 and has been tested and approved by the German test organization TÜV.

  • Easy Installation
    The sensor is easy to install by simply clicking the main and secondary modules into the profile. The main and secondary modules are connected by a communication cable with connector. An alternative power supply connector on the main module makes installation quicker and more flexible.
  • Slim Design
    The sensor has a very slim design to ensure it will fit on many different types of swing door. The sensor is available in a silver or black profile complete with a black lens.
  • Safety
    The wide detection area of each module ensures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door. The OPTEX OA-EDGE T has been tested and approved by the German test organization TÜV and complies with EN 16005.
  • Module
    The sensor can be assembled using main and secondary modules according to the required safety level and the width of the swing door. For a standard configuration of 1 sensor, one main module is required. Depending on the door width, a maximum of 3 secondary modules can be connected to this main module.
  • Quick Adjustment
    Adjustments to the sensor are made using dipswitches and a levelling screw. Once the sensor is set up, an easy push on the function switch will launch the initialization and learning cycle. After installation, the sensor status can be easily checked on the visible LED.
  • Buildings
  • Easy Installation
  • Complies with EN 16005 safety standards
  • Slim Design
Scroll to Top